Vehicles
Sections
167 not categorized PORSCHE 914 ATE BRAKESCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 2005-08 (includes uncategorized and accessory items) 24135299702RS Tired of having to wash the car just due to brake dust build up? Ebc redstuff brake pads have you covered. They reduce brake dust by 60-90%, plus the minimal dust is safely removed with a wet sponge as redstuff does not contain steel fiber particles found in other pads. These pads also have excellent brake friction when cold and just get better as they warm up. The pads are composed of a kevlar fiber-based brake compound enhanced with ceramic particles. The benefits of this material are longevity, enhanced braking performance, quiet operation and reduced brake dust. Features: made for up to 750*c (1,382*f) for street, track and rally use. Low dust, high performance street pad with 20-25% braking improvement. Ca...(choose a part on the right to read more)
$261.80
Make a selection 240996352RSL1 Pagid yellow rsl1 are from the rsl line of endurance racing brake pads. They are a high friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl1 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and have good friction stability vs. Temperature. Applications include: GT cars, touring cars, prototype racing and in spring racing. Features at a glance: high friction coefficient high bite high fade resistance high pad and disc life high modulation pagid is one of the leading manufacturers of racing brake pads and is successful at the world's most demanding racetracks. They offe...(choose a part on the right to read more)
$512.60
Make a selection 24135199601YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$363.00
Make a selection 240997351SV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: • 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. • 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. • 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in perio...(choose a part on the right to read more) General Fitment911 2009-12911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
From $307.40
Make a selection 240996352BV Pagid blue rs42 are from the rs line of all-around racing brake pads. They are a medium friction coefficient racing compound with medium initial bite and good cold friction. Rs42 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and are very stable over that wide temperature range. Rs42 pads offer excellent pedal feel and inspire confidence in extreme braking situations. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: vintage rally racing, formula racing and touring cars. Features at a glance: medium friction coefficient medium initial bite goo...(choose a part on the right to read more) General Fitment911 2009-12911 2005-08 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04 CAYENNE 2003-06
From $218.36
Make a selection 83789680051 Stoptech big brake kit front slotted black caliper Porsche 996 Carrera s 2005 General Fitment911 2005-08
$3,882.60
Make a selection 83781470071 Stoptech big brake kit front slotted red caliper Porsche 996 Carrera s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$3,126.60
Make a selection 83789470052 Stoptech big brake kit front drilled black caliper Porsche 996 Carrera s 2005 General Fitment911 2005-08
$3,126.60
Make a selection 44404480062 High quality polished center console set that includes a polished carbon handbrake, the upper switch and lower switch covers made ready for installation. Each piece is a carbon overlay, meant to be adhered to your original plastic trim covers. We recommend adhering the carbon overlays to your originals with würth bond and seal (sold separately).
$1,460.80
Make a selection 83781470052 Stoptech big brake kit front drilled black caliper Porsche 996 Carrera 4s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$3,126.60
Make a selection 95037014 Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more) General Fitment911 1998-05911 2005-08
$63.42
Make a selection 83781470051 Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$3,126.60
Make a selection 83781004652 Stoptech big brake kit rear drilled black caliper Porsche 996 Carrera 4s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$2,694.60
Make a selection 83781680061 Stoptech big brake kit front slotted silver caliper Porsche 996 Carrera 4s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$3,882.60
Make a selection 83781680052 Stoptech big brake kit front drilled black caliper Porsche 996 Carrera 4s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$3,882.60
Make a selection 83781680072 Stoptech big brake kit front drilled red caliper Porsche 996 Carrera 4s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$3,882.60
Make a selection 837816C0052 Stoptech big brake kit front drilled black caliper Porsche 996 Carrera 4s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$3,666.60
Make a selection 368081694 * maximum stopping power, minimum fade General Fitment911 1998-05911 2005-08 BOXSTER 1997-04 CAYMAN 2006-08
$200.99
Make a selection 837816C0081 Stoptech big brake kit front slotted yellow caliper Porsche 996 Carrera 4s 2005 General Fitment911 2005-08911 TURBO/GT2 2001-05 911 2009-12
$3,666.60
Make a selection 95037013 Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more) General Fitment911 2009-12911 1998-05 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09 911 GT3 2007-11 911 TURBO/GT2 2010-13 CAYMAN 2009-12
$63.42
Make a selection 83798470051 Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4 2004 General Fitment911 1998-05911 2005-08
$3,126.60
Make a selection 348030306 * maximum stopping, minimum fade General Fitment911 1998-05911 2005-08 BOXSTER 1997-04 CAYMAN 2006-08
$207.99
Make a selection 83789680072 Stoptech big brake kit front drilled red caliper Porsche 996 Carrera s 2005 General Fitment911 2005-08
$3,882.60
Make a selection 837896C0071 Stoptech big brake kit front slotted red caliper Porsche 996 Carrera s 2005 General Fitment911 2005-08
$3,666.60
Make a selection 240991351GV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: * 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. * 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. * 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period. Rsl29/yellow: featu...(choose a part on the right to read more)
$657.80
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |